Swiftech MCW60

 

The MCW60 is compatible with 8800GT graphics cards

Swiftech MCW60-R VGA cooler

Introduction

The MCW60™ VGA waterblock is a next generation liquid cooling solution for high-end graphics processors. It evolves from the award winning MCW55 by receiving the same base plate technology as the Apogee water-block for enhanced heat dissipation, and a redesigned injection molded housing for universal compatibility with all liquid cooling systems.

Features and benefits at a glance
Versatility VGA compatibility: the improved mounting system provides compatibility with all ATI® Radeon® and most nVidia® GeForce® graphics adapters (see compatibility section for details).
Water-cooling system compatibility: The water-block ships with 1/2" and 3/8" barbs in the US, and an extra pair of 1/4" fittings for Europe, guaranteeing compatibility with any liquid cooling circuit.
Low water-block profile allows installation with nVidia's SLI and ATI's CrossFire™ systems.
The NPSM thread used in the MCW60 is BSPP and G 1/4 fittings compatible (see technical note on Fittings Compatibility)
Performance
Model		 The thermal performance model focuses extreme cooling where it is in fact the most needed: at the GPU level. This will afford better overclocks, and overall lower system temperature. Efficient and silent memory cooling is handled by using individual Ramsinks.
Water-block Performance The MCW60 waterblock inherits all its thermal and hydraulic characteristics from the Apogee CPU water-block, in particular the Patent Pending Diamond Pin Matrix cold plate, proven for its thermal efficiency with today's high end CPUs.
Thermal performance is improved by up to 2°C compared to the previous MCW50 and 55 series thanks to the enhanced cold plate, and pressure drop is lower thus allowing better overall system flow rates.
Memory performance Greater thermal efficiency is obtained thanks to the superior mechanical joint afforded by individual heatsinks compared to monolithic memory cooling solutions.
This MCW60 is not shipped with (8) MC14 BGA Ramsinks Please order separately.
Reliability The housing is injection molded from POM (Acetal Co-polymer) resulting in complete reliability compared to machined Acrylic tops which tend to crack.
All hydraulic joints (housing to cold-plate and fittings) use o-rings for complete reliability and leak-free operations.
The mounting system includes a strong stiffening back-plate with a soft rubber center pad to prevent the circuit-board from bending .
Cosmetic Appeal In its black and chrome trim, the MCW60 VGA cooler is a perfect match to complement the Apogee CPU cooler, and the MCW30 Chipset cooler.
Works with G80 The G80 adapter kit is used to replace the standard MCW60 hold-down plate and allows installation with GeForce 8000 series Video Cards. The G80 Adapter kit is included with this block.
Lower cost of ownership The injection molded water-block housing results in economies of scale, whereas the individual memory Ramsinks provide significant material savings compared to monolithic solutions. Cost of ownership is thus reduced by up to 50% compared to monolithic solutions, with superior performance where it really counts, and complete freedom in terms of graphics cards upgradeability.

For a TradeMe style trade click on the link below .

Postage is $5 for standard post

$ 92

 

out of stock